How to Remove Oil Based Paint From Concrete

If you've ever spilled paint on your driveway, patio, or garage floor, you probably accepted that it wasn't going away. There's no doubt that removing paint from concrete is time-consuming and laborious. Yet, where there's a will, there's a way. Follow this tutorial to successfully remove paint stains from your driveway or patio.

What You Will Need to Follow this Tutorial

• Broom and Dustpan
• Paint Stripper
• Scrub Brush
• Paint Scraper or Putty Knife
• Industrial Sodium Bicarbonate
• Bucket
• Protective Gear

How to Remove Paint from Concrete without Chemicals

• Water
• Pressure Washer

Step-by-Step Tutorial

Paint Stripper Method

Step 1: Clean the concrete surface and allow it to dry.

Use a contractor's broom to sweep away any loose debris and dirt. Then, use mild soap and water solution to scrub away any remaining soil. Invest in a long-handled deck brush with durable polypropylene bristles. This will eliminate the need to kneel our walk over wet concrete.

Floor Scrub Brush with Long Handle 50"

• Two bristles effectively remove stains on hard floors
• Adjust handle length
• The brush can applied to both dry and wet cleaning

Check Price

Once you've finished scrubbing the concrete, use a garden hose or pressure washer to rinse away any remaining soap suds or grime. Then, allow the surface to dry completely. Plan accordingly, as this make take several hours.

2. Apply Paint Stripper

Tip: It's important that you choose the right paint stripper for the job. Strippers come in two varieties. There are special strippers for removing water-based paints and ones for removing oil-based paints. If you are unaware of what type of paint has been spilled, opt for an oil-based stripper.

Citristrip QCSG801 Paint & Varnish Stripping Gel

• Citrus scent; no harsh fumes
• Contains no methylene chloride
• Gel formula stays active for up to 24 hours

Check Price

Apply a generous amount of paint stripper to the affected area. Follow the manufacturer's instructions. Use protective gear to prevent your skin from coming in contact with any chemical product.

3. Let the Stripper Sit

Let the paint stripper sit for an extended period of time. You may leave it for several minutes or a few hours. During this time, take care to prevent children and animals from coming in contact with the substance. The paint may bubble up and separate from the surface of the concrete.

4. Scrub the Area

After you allow the paint stripper to work its magic, it's time to scrub off loosened paint. Use a durable scrub brush and a paint scraper to wash away any loose paint. Continue to scour the surface until no paint debris can be removed.

5. Wash the Affected Area

Use your garden hose to carefully spray the affected area. Pressurized water often works its way into the concrete's air holes to help remove stubborn paint.

6. Repeat

After the affected area has dried, assess the damage. If there is still paint that needs to be removed, repeat steps two through four. You may continue to reapply the paint stripper until all the paint has been removed.

7. Clean the Concrete

Always finish this process by cleaning the affected area with water. Paint strippers contain a toxic chemical substance called methylene chloride. Exposure to methylene chloride may result in chemical burns or other health problems.

If the paint you are removing was crafted prior to 1978, it may even generate hazardous fumes containing lead. As such, you should always wear gloves, safety goggles, and a face mask, or respirator, when utilizing paint stripper.

Absorbent Paint Stripper Method

1. Make an Absorbent Paint Stripper

If the paint spill that you are dealing with is quite large, you should consider making your own absorbent paint stripper. To do this, mix equal parts of finely ground clay (you may also use unscented cat litter) and paint stripper together. The goal is to create a thick paste that can be applied to a concrete-based paint spill.

Reminder: Always wear safety gear when handling chemical paint strippers. You want to avoid direct contact with the chemical. You also want to avoid inhaling any chemical fumes.

2. Apply the Paste

Apply a thick layer of paint thinner paste to the paint spill. Let it sit for several hours. Then, carefully remove the paste. Use a scrub brush and a paint scraper to scour the surface of the concrete. Remove any loose paint and discard of it properly.

3. Rinse and Repeat

Rinse the concrete with water and let it dry. Repeat until all the paint has been removed from the affected area. As always, wear protective clothing and safety gear to avoid coming in contact with harmful chemicals.

Blasting Method

1. Acquire a Blasting Unit

If you are looking to remove a large amount of paint from concrete, then a pot blaster may be your best option. Oftentimes, you can rent a blasting unit from a local hardware store. While high-powered blasting may sound intimidating, this method is far more environmentally friendly than using chemical-laden paint strippers.

You will also need a mixture of industrial sodium bicarbonate. Sodium bicarbonate is the chemical named for baking soda. With that said, the kind used in blasting equipment coarser than the food-grade alternatives.

2. Prepare for Action

It is important to always wear a respirator when blasting paint off of a concrete surface. This will prevent you from ingesting debris and chemicals. With that said, you should also wear protective clothing, gloves, and goggles.

Fill the blaster's reservoir with sodium bicarbonate. Follow the manufacturer's instructions to make sure that the machine is set up properly. Blasting equipment uses electricity to create powerful air pressure. It's important to make sure that all valves are closed and sealed properly before the machine is turned on.

3. Blast the Affected Area

Position yourself a foot or so away from the affected area. Use the blaster to direct gusts of soda at the paint.

4. Clean your Work Area

Use a garden hose or high-pressure cleaner to remove paint chips and soda from the affected area. Keep in mind that sodium bicarbonate can damage flowers, bushes, and trees. It's important to contain the solution in order to prevent it from seeping into your garden.

How to Remove Spray Paint from Concrete

Are you looking to eradicate spray paint splatter? You may be able to remove it with a soapy solution and a bit of elbow grease. However, if that doesn't work, chemicals most likely will.

We recommend using a mixture of trisodium phosphate and water to remove stubborn spray paint stains. Trisodium phosphate is a chemical compound that can be used to remove stains and grease from concrete. It's a common ingredient in many household cleaning products.

Note: Always wear gloves and goggles when using trisodium phosphate. It has the potential to burn your skin.

Apply a generous amount of trisodium phosphate to the spray paint-affected area. Let it sit for a few minutes. This will enable it to permeate the porous surface of the concrete. After a short period, use a scrub brush to scour the loose paint.

Then, clean the remaining trisodium phosphate from the surface of the concrete. Take care not to leave any chemical residue behind, as it can harm people, animals, and plants who unknowingly come in contact with it.

If you are looking to avoid chemical solvents, consider using a power washer to remove spray paint splatter from the surface of the concrete. Pressurized water and/or cleaning solutions do a great job of cleaning porous surfaces. You may rent an industrial pressure washer from your local hardware store or buy one to keep on hand.

How to Remove Paint from Concrete without Chemicals

If you are a homeowner with small children or pets, you may want to remove the paint from your concrete without using potentially harmful chemicals. Soda blasters and pressure washers are the most eco-friendly options.

There are also a few non-toxic paint strippers that you may want to consider using. Soy Gel is a low-odor, non-toxic, biodegradable paint stripper that is manufactured by Franmar. It does not contain methylene chloride. Instead, the manufacturer uses American-grown soybeans to create a plant-derived substance that can remove paint from concrete and other surfaces.

How to Remove Latex Paint from Concrete

If you are looking to deal with a latex paint spill, there's good news. Latex paint is water-based. When compared to oil-based paints, latex is far easier to eradicate.

If the paint spill is still wet, use paper towels and shop rags to remove as much paint as possible. When dealing with dried latex paint spills, follow these steps:

1. Clean the Area

Paint removal is always more effective when you are dealing with a clean surface. Use a contractor's broom to remove any caked on dust and debris. Then, use a wire brush and/or a paint scraper to loosen and remove as much paint as possible.

2. Use Ammonia

Ammonia is a common household cleaner. Apply a generous layer of ammonia to the affected area. You may also use a cloth saturated in ammonia to guarantee full coverage. Let the ammonia solution sit for about an hour. Ammonia causes latex paint to bubble up. Then, use a scrub brush to scrape away loosened paint.

Reapply the solution as needed until you get your desired results. Always rinse the affected area with water before closing up shop.

3. Use Paint Thinner

Thick, stubborn stains may require a stronger solvent. Consider purchasing a paint stripper designated for water-based paints. Follow the instructions above to safely remove latex paint using paint stripper.

4. Use Alcohol

Alcohol is a common household chemical that can be used to remove latex paint from concrete surfaces. Apply a generous amount of alcohol to a rag and apply it directly to the affected area. Massage the alcohol into the stain to loosen the paint.

Tip: Avoid letting the latex paint cure! Many people are surprised to find that it takes several weeks for latex paint to cure. Always use soap and water to remove latex before it cures.

How to Remove Acrylic Paint from Concrete

It is far easier to remove acrylic paint when it wet. As such, always blot up your spills in a timely manner. After the bulk of the paint has been removed, use a soap and water solution to cleanse the area. Use a sturdy scrub brush to dig deep into the porous crevices of the concrete.

For dry messes, consider using an acrylic paint remover such as Blick Acrylic Remover or Goof Off. Acrylic paints are water-based. As such, they are far easier to remove than oil-based alternatives. Still, you may need to use a little elbow grease to work the acrylic out of the porous surface of your concrete.

How to Remove Epoxy Paint from Concrete

You'll need a few special supplies to remove epoxy from concrete. Epoxy is often used to coat garage floors. When it comes time to apply a new coat, removing the old one can be a major hassle. There are several types of chemical solvent that can be used to remove an epoxy coating. Lacquer and acetone are some of the most popular ones.

With that said, many homeowners choose to use a floor grinder to remove epoxy from their garage floors. Epoxy binds with concrete for a lifetime of coverage. As such, it is one of the most difficult substances to remove. It often takes several coats of lacquer or paint stripper to cut away at epoxy concrete sealants.

Tips and Tricks

Homeowners are often intimidated by the paint removal process. Sometimes, two or three applications are needed to completely remove paint from concrete. Still, it only takes a little effort to revitalize concrete.

If you are uncomfortable using chemical solvents, consider using a soy-based paint stripper. These substances work surprisingly well considering they are non-toxic and made from plants. Of course, soap and water solutions have been known to remove small stains too.

Don't overwhelm yourself by attempting to hand scrub a large surface. Soda blasters, pressure washers, and floor sanders can be rented for a reasonable price. If you need to remove a large amount of paint, consider renting one of these handy appliances to save yourself of grueling physical labor.

A Quick Reminder

Accidents happen!

Still, concrete is an incredibly durable substance that is built to last a lifetime or more. Don't sit around staring at unsightly spills when you can easily get rid of them. Do your best to respond to paint stains in a timely and productive manner.

Final Thoughts

Do you have an ugly paint stain on your concrete? Has it been there for ages? If you are willing to put in a little time and effort, you can make that stain disappear. Follow out simple step-by-step instructions to remove paint spills from your driveway, patio, and garage!

[sc_fs_multi_faq headline-0="h3″ question-0="💰 How to Remove Paint from Concrete?" answer-0="It depends on your paint type. We've got a step-by-step tutorial that covers Old Paint, Acrylic, Latex, Epoxy right here." image-0="" headline-1="h3″ question-1="❤️ How to Remove Latex Paint from Concrete Driveway" answer-1="You should use either a sand blaser or a gel thinner that works pretty well with it. Then remove latex with floor scrub brush." image-1="" headline-2="h3″ question-2="🍀 How to Remove Dry Latex Paint from Concrete?" answer-2="The same way as above. You should use a thinner chemicals along with hard brushes. Recommended chemicals and step-by-step tutorials just inside our article." image-2="" count="3″ html="true" css_class=""]

How to Remove Oil Based Paint From Concrete

Source: https://thatpainter.com/how-to-remove-paint-from-concrete/

Share this post